Chapter 10: Camera setup
TruVision DVR 45HD User Manual
63
Figure 20: Analog Camera Overview window (8-channel recorder model shown)
List of analog channels (number depends on recorder
model)
List of IP channels
Maximum number of IP cameras that can be connected
To enable or disable an analog camera:
1. From the menu toolbar, click
Camera Setup
>
Analog Camera Overview
.
2. Check the boxes of the analog cameras that you want to enable.
Note
: Every channel must be allocated to a channel type (analog or IP). If not, the
following error message appears: “Please select at least one signal type”.
3. Click
Apply
to save the changes.
4. A pop-up message will appear asking if you want to reboot the system. Click
Yes
.
5. Click
Exit
to return to live view.
IP camera status
The
IP Camera Status
menu allows you to add, edit and remove IP cameras to the
recorder, as well as update the cameras’ firmware. The recorder supports all TruVision
IP cameras and encoders and is compliant with ONVIF profile S cameras.
Note
: Ensure that the ONVIF camera has been tested together with the recorder before
installation.
The maximum number of IP cameras that can be connected depends on the number of
analog cameras enabled. You must disable an analog camera to add an IP camera.
