Chapter 10: Camera setup
80
TruVision DVR 45HD User Manual
To enable V-streaming:
1. From the menu toolbar, click
Camera Setup
>
V-Stream Encoding
.
2. Check the
Enable V-Stream Encoding
box to enable the feature.
3. Select the
Frame Rate
from the drop-down menu.
4. Select the
Max. Bitrate
from the drop-down menu.
Note
: The layout of the V-stream can be set up via the OSD menu (Display Settings >
Layout menu (BNC)) or via the webpage.
To configure V-streaming:
The V-stream shows video on the recorder’s BNC output.
1. Click the
Display Settings
>
Display
>
Video Output Interface
and select
V-
stream/BNC
.
2. Under
Default View
, select the desired view format.
3. Under
Sequence Dwell Time
, select the desired camera sequence mode.
Note
: Sequencing can only be done in single-view display mode.
4. Click the
Display Settings
>
Layout
>
Video Output Interface
and select
V-
stream/BNC
.
5. Select the desired sequence order of the cameras.
6. Click
Apply
to save the settings and
Exit
to return to live view.
Call-up the TruVision HD-TVI camera OSD menu
TruVision HD-TVI cameras with dual video outputs (HD-TVI and standard CVBS)
support the camera OSD feature. This camera OSD can be accessed via the recorder.
To call-up the TruVision HD-TVI camera OSD menu:
1. Connect the camera’s TruVision HD-TVI output directly to the recorder.
Note
: The camera must be connected directly to the recorder and not via a
distributor.
2. In
Camera Settings
access the PTZ menu. The default protocol for the TruVision
HD-TVI camera is TruVision-Coax.
3. In live view of the desired camera, click the
PTZ Control
icon on the live view
toolbar to access the PTZ control panel (see PTZ preset and tours” on page 30 for
further information).
4.
Using the recorder OSD
: Click the
Iris+
or
Menu
button to open the camera’s OSD
menu.
Using the browser
: Click the Iris+ button to open the camera’s OSD menu. See the
camera’s user manual for further information on configuring the camera. For
