: Network settings
90
TruVision DVR 45HD User Manual
The test result appears in a pop-up window.
3. If you need to check the current network parameters, click the
Network
button to
get an overview. The current values for NIC type, DHCP, IPv4 address, IPv4 subnet
mask, IPv4 default gateway are shown as well as the preferred DNS server and
alternate DNS server if used.
The
NIC Type
and
Enable DHCP
options can be changed. Click
Apply
to save any
changes made and then click
OK
to return to the main window.
4. Click
Exit
to return to live view.
To check network status:
1. When all the network parameters have been set, click the
Status
button to confirm
that all parameters are operating correctly.
Export network packet data
When the recorder is connected to a network, you can export the captured data packet
to a USB-flash drive, SATA/eSATA CD-RW and other local backup devices.
To export network packet data:
1. From the menu toolbar, click
Network Settings
>
Net Detect
.
2. Click
Refresh
to get a list of the local backup devices available, which are listed
under
Device Name
. Select one from the list.
3. Click
Archive
to export the data to the backup device. Up to 1M of data can be
exported at a time.
4. Click
Exit
to return to live view.
Network statistics
You can easily check the bandwidth that is being used by remote live view and
playback.
To check network statistics:
1. From the menu toolbar, click
Network Settings
>
Net Statistics
.
2. The latest information is displayed on the bandwidth used by remote live view and
playback as well by Net Receive Idle and Net Send Idle. Click
Refresh
to update
the information.
3. Click
Exit
to return to live view.
