46
LenelS2 EVA 54 User Manual
Deleting a user
There is always at least one Super User account. You cannot delete the user
account you used to log in. To delete a user:
1. Log into RAID Manager as the Administrator or a Super User.
2. Click the Administrative Tools icon.
3. Click the User Management icon.
4. Click the Delete tab in Management View.
5. Check the box to the left of the user you want to delete.
6. Click the Submit button.
7. Click OK in the confirmation box.
View network settings
To view network settings for the Ethernet ports, including the port used for access to
RAID Manager, click on the View Network Settings icon under Administrative Tools.
Information listed for each port includes:
• If the port is enabled/disabled
• If the link is up/down
• IP type IPv4/IPv6
• IP address
• Subnet mask
• MAC address
• Maximum port speed
Software management
The Software Management menu is used to manage settings for Email, SNMP
settings and Web services. The Email function is used for sending notifications of
events. The Web service is used for remote network connection to the RAID
Manager interface. This is also where you can export and import configuration script
files and user database files.
Importing a configuration script
You can write a CLI configuration script to automatically configure your LenelS2
EVA 54 subsystem. The script must be a plain, non-encrypted text file. From there,
you can import the script from the Host PC and perform the configuration
automatically.
Caution:
Do NOT attempt to write or modify a configuration script until you receive
guidance from Technical Support. Importing a configuration script overwrites the
current settings on your LenelS2 EVA 54 subsystem.
Or you can save the configuration from one LenelS2 EVA 54 subsystem, export it,
and then import it to automatically configure your other LenelS2 EVA 54 subsystems.
To import a configuration script: