LenelS2 EVA 54 User Manual
55
Enclosures
The Enclosure menus are used to provide information for and monitor the status
about the various components of the enclosure unit. Click on a specific enclosure in
Tree view or in the Enclosures list to display information or settings menus for an
enclosure.
Locate an enclosure
To locate an enclosure in the list, click the Locate button. The LED indicators on the
front panel of the enclosure will blink for one minute.
Enclosure information
The Enclosure Information read-only display menu provides key real-time information
about current hardware status of the enclosure. Click on the expanders buttons to
reveal current conditions and status of the enclosure, power supplies, fans, blowers,
temperature sensors and voltage sensors. Move the cursor over the icons in the
virtual enclosure displayed at the top of the menu to see current status and relevant
conditional statistics for the fans, power supplies, and temperature sensors.
Figure 16: Enclosure information
Enclosure temperature sensor settings
The temperature threshold settings are used to send event notices when the internal
temperature reaches a high level. To set enclosure temperature thresholds, click on
the enclosure in Tree View, then click on the Settings tab to view the Enclosure
Settings menu. There are two thresholds to configure:
• Controller Warning Temperature Threshold [90°C to 95°C] - If the enclosure
temperature reaches this threshold, a warning message is sent and an event is
recorded in the event log.