TruVision DVR 12 User Manual
135
2. Scroll through the menus with the
button until this menu appears:
3. Change
Operating Mode
to
Zone
by moving the joystick down.
4. Quit the menu by pressing the
seq
button. The display will show, for example:
5. To connect it to the recorder, press the
zone
button and enter the ID number
of the recorder. The default value is “1”.
6. To configure the recorder zone ID number, at the recorder enter the Monitor
screen by selecting
Display Mode Settings
in the main menu and select
Monitor. Under Zone ID, enter the zone ID value. The default value is “1”.
Note
: The zone ID value must be identical for the recorder and keypad.
The recorder is now connected to the KTD-405 keypad.
Recorder and keypad functions
The KTD-405U acts as a recorder control keypad when connected to the
recorder. The keypad mimics many of the functions available from the front panel
of the recorder.
Unavailable recorder functions
The following TVR 12 functions are unavailable when using the keypad to control
the recorder:
Export video
Shadow tour
Select motion detection or tampering zones
Archive records
Capture video
If these functions are required, it is recommended to use a mouse in conjunction
with the keypad as all recorder functions will then be available.
Unavailable keypad functions
The following keypad buttons are unavailable when using the keypad to control
the recorder:
