SAFETY INSTRUCTIONS
TO REDUCE THE RISKS OF INJURY, PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USING AXP17 EXTREME POWER SPRAYER:
1. Never leave the product unattended when switched on. Switch the product off when not in use.
2. The product must only be used for its intended purpose and in accordance with these instructions. Only
use parts and accessories recommended by the manufacturer.
3. Do not use the product with sea water, muddy or dirty water.
4. Carefully supervise the product when it is used by, or near, children or persons with functional limits.
5. Charge the battery only with a charger having an output voltage of 5 VDC / 0.5A-2A.
6. Do not use the product if the power cord or plug is damaged. Check that the charging voltage
corresponds to the rated voltage on the name plate. Charging with different voltage can result in a risk
of personal injury and/or material damage.
7. Always check the product before using it for damaged, loose, worn or missing parts.
8. Do not expose the product to fire or other sources of heat.
9. Do not expose the product to temperatures below 0°C, this can damage the motor and power cord.
10. Do not spray water or other liquids onto the sprayer head. Do not immerse it into water or other liquids.
11. Do not dismantle the product or attempt to repair it, this will invalidate the warranty.
12. Do not charge the battery overnight. Do not overcharge.
SPECIFICATIONS
Battery Type
Lithium ion
Voltage
5V DC
Battery Capacity
3.7V 2200mAh
Charging time
3-4 Hours
Charging Cable
USB Type-C Cable
Run Time
3-4 Hours per charge
Bottle Capacity
17oz (520mL)
OVERVIEW
HOW TO OPERATE
1. Fill the liquid into the bottle and screw the
sprayer head onto the bottle with the suction
tube inside it. Do not over-fill beyond the fill
line marked on the bottle.
2. Unlock the operation switch by sliding the key
down to access the auto or manual mode:
Auto mode:
Touch the switch twice
consecutively to select the auto working
mode. Touch the switch again to switch it off.
Manual mode:
The sprayer will start working
by holding the switch over 2 seconds and stop
once the switch is released.
3. Turn the nozzle clockwise (until it can’t
turn more) to have the maximum misting
effect.
Turn the nozzle counter-clockwise to
move towards the jet mode.
The battery indicator:
Soft touch the switch once, the indicator will
light on to show the battery level.
The light will be flashing during charging; all
lights will stay on when fully charged.
Hanging Hole
Jet Mode
Adjustable
Nozzle
On-off
Switch
Sliding Lock
Charging Port
Cover
Charging Port
Unlock
Battery Indicator
Fine Mist Mode
Max Liquid
Level Indicator
