Page
31
of
54
Fig.20 Multiple choices in the Settings Menu
The units in the Settings Menu available are explained in detail in the following sections.
9.4.1
General
The settings that this menu allows to configure are shown in the table below.
MENU ITEM
DEFAULT VALUE
DESCRIPTION
Base language English
Allows the user to choose the language on the base station.
Power mode
Normal
User can choose power mode. There are 3 options available:
Normal, Eco and Super Wideband
Time format
24 Hour (HH:MM)
The time format can be set AM/PM, 24Hour(H:MM) or 24
Hour (HH:MM)
Secondary
auto
deregister
On
Can be on or off. When active and secondary headset is
present in a conference call, the base will automatically
deregister the secondary headset as soon as the conference
call has ended.
Power level
3
Allows the user to set power level of the base. Can be se to
adaptive or between values from 1(maximum power) to
6(minimum power).
NOTE: If the user is in an area with a lot of interference user
can set the power level to 1 (max power) but that will
contribute to the noise. The adaptive setting lets the base to
adaptively choose the power level, but that will consume
more energy. In an area with no other DECT devices present
and/or other sources of interference using power level 6 (min
power) will save energy.
