Page
39
of
54
11
Clave DECT Dongle features
The RX3741 DECT dongle has many of the same features as the Clave Base station.
11.1
Conference
The Clave DECT Dongle supports internal conference which allows up to three additional headsets to listen-
in on and participate in calls controlled by the primary headset of the Clave DECT Dongle.
The secondary headsets can register on the Clave DECT Dongle before or during the call and will have their
microphones muted by default when joining. (Refer to
7. How to connect headset and base station
)
The secondary headset user can unmute the microphone and can then participate actively in the conference
call.
The secondary headsets cannot terminate the conference call because the call is controlled by the primary
headset, but they can actively leave the call.
A secondary headset is deregistered from the dongle when:
•
The headset actively leaves the conference call by long pressing the Multi-Function button
•
The conference call is terminated by either the primary headset or the far end (depends on the same
setting as above)
•
The headset registers back as primary on its own dongle by short pressing the DECT button when
idle (not in call)
11.2
Soft Client Support
The Clave DECT Dongle combined with one of the four UH headsets supports the audio and USB API of the
following applications:
•
Skype for Business (aka Lync)
•
MS Teams
•
Other call clients can be supported
o
require PC tool to be running
o
or UH USB HID API to be supported by call client
