Page
47
of
54
PARAMETER
DEFAULT VALUES
DESCRIPTION
NAME
Empty
The name displayed on the headset base overview page
IPEI
FFFFFFFFFF
The IPEI of the headset base. In general, this must not be
changed manually. If IPEI is left at FFFFFFFFFF, any headset base
can register at this index. Else, only the headset base with the
specified IPEI number can register to the VoIP system
TERMINAL
No Terminal
This setting enables the administrator to assign a SIP account to
the headset base. The following options are available:
No Terminal:
No SIP account assigned.
Terminal Idx x:
An available extension/SIP account slot which
can be assigned to the headset base.
New Terminal:
Creates a new terminal/extension slot on the
Extensions
page with the IPEI of the headset base. The
administrator needs to edit the extension details in order to SIP
register the headset base.
NOTE:
By SIP registering the Clave Base, the user can use the headset both for
VoIP calls and for other PC applications (such as music, softphones, etc.)
Step 4
Mark the newly added headset base and select
Register headset base
to enable the registration
mode.
NOTE:
The Access code (AC), used as an authentication method by the headset base, is placed on top of
the page and can be configured by the administrator.
Step 5
On the headset base, enter the menu via the scroller (left-hand side) and scroll down to
VoIP
System
Step 6
Enter the
VoIP system
menu and select
Register
Step 7
Enter the
Access code (AC)
NOTE:
By default, the AC is
0000
. You can change the AC code on the VoIP base (See step
4
)
Step 8
The headset base will start the registration process. After a while, it will be registered to the
VoIP system.
