Page
20
of
54
6
Clave DECT Dongle overview
The Clave DECT is a USB type A dongle with slide switch that can establish a wireless connection with the
UH headsets from the Clave series. The dongle supports dual mode, meaning that it can be used either as
a Fixed part (FP), or Portable part (PP).
-
Base / FP mode:
o
Acts as a DECT base for the Clave Headsets
-
Headset / PP mode:
o
Enables DECT access for a USB desktop phone on the UH VoIP system
Since the DECT dongle can run one mode at a time, you can switch between the two functionalities by
using the slider switch.
The device is designed to be easy to use with a desk phone/PC/laptop with very good sound quality. Since
the device uses DECT technology, it can remember 4 registrations
–
one primary and three secondaries.
The audio can be directed to the headset, depending on the user’s choice. When the headset is
connected via the Clave DECT Dongle to a PC, the user may access calls from Soft Call Clients, such as
Microsoft Teams. Support for other call clients is available and requires that the PC Setup tool is installed
on the used laptop/PC.
6.1
Clave DECT Dongle overview
The Clave DECT Dongle has
one button, one slider switch and 3 LED’s
(Fig.14)
Fig.14 Dongle overview
