background image

14

EN

Maintenance

Cabinet Cleaning

• Wipe the front panel and other exterior surfaces of the unit 

with a soft cloth that has been immersed in lukewarm water 
and wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide 

liquid near the unit. Such chemicals may cause damage and 
discolouration to the exposed surfaces.

Auto Head Cleaning

• This feature automatically cleans the heads as you insert or 

remove a cassette to ensure a clear picture.

• The playback picture may become blurred or interrupted 

even if the TV programme received is clear. This does not 
mean that the recorded programme has been erased. This 
problem is caused by dirt accumulated on the head after 
long periods of use, or usage of rental or old tapes. In this 
case, head cleaning requires highly technical expertise and 
the nearest dealer should therefore be consulted. Clean 
heads only when problems occur.

Service

Should your unit become inoperative, do not try to correct the 
problem by yourself. There are no user-serviceable parts inside. 
Turn the unit off, unplug the power cord, and take the unit to 
a Service Centre for servicing.

T6627SH(EN).fm  Page 14  Thursday, January 22, 2004  1:27 PM

Summary of Contents for TVC5044

















Reviews: