![background image](http://html1.mh-extra.com/html/united/tvc5044/tvc5044_owners-manual_4031870005.webp)
5
EN
Installation
Connecting the TV-Video Combi
Connecting the Cable
1)
Insert the VHF/UHF TV aerial coaxial cable plug into the
AERIAL socket at the back of the unit.
2)
Plug this unit into an AC outlet.
3)
If the little red STANDBY indicator on the front panel
does not light on, power on the unit with the main power
switch. The main power switch is located on the left side
panel.
Connecting Additional Devices
You can connect an additional device such as decoder, satellite
receiver, camcorder, etc. to the EXT1/AV1 scart socket.
The scart socket to be connected is usually marked 'AV' or
'TV' on the decoder or satellite receiver.
You can also use the front AUDIO/VIDEO input sockets.
Note:
• To receive the signals from an external source , select an
input mode ‘AV1’ or ‘AV2’ on this unit by pressing
PROG +
/
-
or the
number buttons
.
• If you are using the EXT1/AV1 scart socket, select ‘AV1’. If
you are using the front AUDIO/VIDEO input sockets,
select ‘AV2’ .
EXT1/AV1
VHF/UHF
MIXER
UHF
VHF
EXT1/AV1
T6627SH(EN).fm Page 5 Thursday, January 22, 2004 1:27 PM