2-VOLTAGE
Before using the appliance at the first time, ensure that your mains voltage
corresponds to voltage indicated on the appliance.
It is a class I appliance and
must be earthed.
3-SAFETY
CAUTION: Before fitting or removing the appliance, ensure that the
heater's power line supplying the heater is disconnected. Check that the
power line is connected to a 30mA differential circuit breaker.
■
This appliance is designed for use in gardens
■
When it is switch on, an electrical heating appliance reaches very high
temperature libel to cause burns. Make sure that all other users are aware
of the risks.
■
If you have any doubts concerning installation possibilities for this heater,
please consult a qualified electrician.
■
Children, the elderly and the infirm may not always be aware of the
danger involved in using electrical appliances. Never allow this appliance
to be used without supervision.
■
The appliance must be positioned so that the plug is accessible.
■
If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or similar qualified person in order to avoid a hazard
■
The heater must not be located immediately below a socket-outlet
■
Do not use this heater with a programmer, timer or any other device that
switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly
.
■
Do not place the appliance close to curtains and other combustible
materials.
4. HOW TO ASSEMBLE
■
Before installing your appliance, you must disconnect the electrical
supply at the circuit breaker.
■
Use the four screws to fix the bracket of the heater on the wall on a right
position and then fix the heater on the bracket.
5-OPERATION
The appliance is switched on by means of the pull switch . The slight vibration
noticeable when the appliance is switched on will stop after a few seconds.
Summary of Contents for UHQ-819
Page 5: ......
