Nota
FAQ
23
1. Conecte el cable de alimentación a la estación de carga.
2. Instale el separador en la base de carga.
3. Conecte el cable de carga corto a su dispositivo y, a
continuación, comenzará a cargar.
4. Durante la carga, puedes pulsar el botón para encender o
apagar la luz LED azul. La luz LED se apaga automáticamente
cuando está en modo de carga lenta.
1. Al insertar el soporte, por favor, preste atención a la ranura de
inserción, asegúrese de que no hay espacio entre la estación de
carga y el soporte.
2. Manténgalo alejado de líquidos y fuentes de alta temperatura.
3. Si hay polvo en la superficie de goma antideslizante de la
estación de carga, puede utilizar un paño seco o un trapo para
limpiarlo.
4. Si utiliza un paño seco, asegúrese de desenchufar el cable de la
toma de corriente antes de limpiarlo, y séquelo antes de volver a
enchufarlo.
5. No deje caer, golpee ni desmonte el producto usted mismo.
6. Hay un interruptor de encendido/apagado en el lateral de la base
de carga. Sólo enciende o apaga los LED de estado (luces azules).
7. Manténgalo fuera del alcance de los niños.
Q: ¿Por qué el tiempo de carga varía cada vez?
A: Esto se debe a que los teléfonos inteligentes y las tabletas
evalúan automáticamente el nivel de carga de la batería y
suministran la energía más eficiente. Cuando el dispositivo de
carga tiene más batería restante, la velocidad de carga será más
lenta y, a continuación, cambiará a carga lenta.
Q: ¿Podría aplicarse un puerto QC3.0 para cargar el dispositivo
que no admite carga rápida?
A: Sí. El puerto QC3.0 reconocerá automáticamente el voltaje y la
corriente del dispositivo de carga. Si se conecta a un dispositivo
QC2.0 o no de carga rápida, el voltaje se ajustará automática-
mente a 5V para proteger el dispositivo contra sobretensiones.
Q: Cuando se va a cargar un dispositivo QC3.0 o QC2.0, pero no
se reconoce como dispositivo de carga rápida, ¿por qué?
A: Si se utiliza un cable de carga de mala calidad, la transmisión de
corriente se verá seriamente afectada y el dispositivo no podrá ser
identificado como compatible con QC3.0 o QC2.0. Se recomienda
encarecidamente utilizar un cable original o de alta calidad para
disfrutar de la función de carga rápida.
Q: ¿Por qué la estación de carga deja de funcionar de repente?
A: Cuando la potencia total de salida supere el límite, la estación
de carga dejará de cargar automáticamente para proteger los
dispositivos y evitar daños causados por la sobretensión. Basta
con retirar algunos de los dispositivos y encender la estación de
carga para poder seguir utilizándola.