Note
FAQ
3
1. Connect the power cord to the charging station.
2. Install the divider on the charging stand.
3. Connect the short charging cable to your device, and then it will
start to charging.
4. When charging, you can press button to turn on/off the blue LED
light. LED light turns off automatically when in trickle charging
mode.
1. When inserting the bracket, please pay attention to the insertion
slot, ensure that no space between the charging station and the
bracket.
2. Keep away from liquids and high temperature sources when
using.
3. If there have the dust on the anti-slip rubber surface of the
charging station, You may use a dry or dump cloth to wipe it off.
4. lf you use a dump cloth, make sure to unplug the cable from the
power outlet before cleaning, and dry it up before plugging the
power back.
5. Do not drop, knock or disassemble the product yourself.
6. There is an on/off switch on the side of the charging base. This is
not a power switch. lt only turns the status LEDs (blue lights) on or
off.
7. Keep it out of reach of children.
Q: Why the charging time is varying each time?
A: This is because smartphones and tablets will automatically
evaluate the battery power level and output the most efficient
power. When the charging device has higher remaining battery, the
charging speed will be slower, then switch to trickle charging.
Q: Could a QC3.0 port be applied to charge the device not support
quick charge?
A: Yes. The QC3.0 port will automatically recognize the voltage &
current of charging device. If it was connected to a QC2.0 or not
quick charge device, the voltage will be automatically set to 5V to
protect against over-voltage of the device.
Q: When a QC3.0 or QC2.0 device is to be charged, but it is not
recognized as a fast-charge device, Why?
A: It should involve using the charging cable with poor quality which
will seriously affect the current transmission and result the device
cannot be identified as a support QC3.0 or QC2.0 device. It is
highly recommended that original or high-quality cable should be
used in order to enjoy the fast-charge function.
Q: Why the charging station stop working suddenly?
A: When the total power output exceeds the limit, the charging
station will stop charging automatically to protect the devices avoid
damage caused by over-voltage. Just remove some of the devices
and turn on the charging station, then you can continue to use it.