background image

ENGLISH

4

The heating of the iron is indepen-

dent from the boiler, and therefore 

it is possible to iron without the use 

of steam. Some steam generators 

are equipped with a separate 

switch for the iron.

MAINTENANCE

The steam which comes in contact 

with the bottom of the iron is cal-

cium-free; the iron does not need 

to be decalcified.

Press button (

A

) to obtain steam.

Push the steam-lock button (

B

forward to have a continued supply 

of steam. Bring it back to the origi-

nal position to stop the supply.

Ironing with the aid of steam is 

possible when the selection knob is 

on the wool    or cotton-linen 

 

setting.

At a lower temperature, the steam 

cools and drops of water may be 

discharged.

Steam is supplied regardless of the 

inclination of the iron. The steam 

can be utilized to touch up curtains, 

clothing, upholstery with vertical 

ironing.

VERTICAL IRONING

IRONING WITHOUT STEAM

DISPOSAL INSTRUCTIONS AND ENVIRONMENTAL PROTECTION STANDARDS

Dispose of packaging and used filters in accordance with current standards. Follow the instructions for any mate-

rial recycling (segregated collection) in your area. This product conforms to the 2012/19/EU Directive. The symbol 

of a crossed out basket on the device specifies that the product should be disposed of separately from domestic 

waste at the end of its useful life. The user is responsible for taking the expired device to an appropriate collection 

point. Suitable segregated collection for ensuing recycling, treatment and environmentally compatible disposal 

helps prevent potentially negative effects on the environment and on health and favors recycling of the product’s 

materials. For more detailed information on available collection systems, consult your local waste disposal service 

or he shop where the product was purchased.

Connect the iron to the boiler via 

the connector (

E

) and start up the 

steam generator as described in 

the respective manual.

Regulate the position of the knob 

according to the fabric to be ironed.

The heating indicator light (

D

turns on when the iron is heating. 

When it switches off, it is possible 

to begin ironing. During use, the 

indicator lights up and switches off 

various times: you may disregard it.

STEAM-IRONING

CONNECTION AND SWITCHING ON

 Synthetics-Silk 

 Wool

 Cotton-Linen

Summary of Contents for F91

















Reviews: