USB Dongle Series Model:UD-731
UniTraQ International Corp.
RoHS compliance
.
2010,07, Version 1.3
6
7. Software Installation
7.1 Overview
USB Driver is necessary software which allows you to operate UD-731 on your computer
properly once the device is connected with the computer. USB Driver is different
depending on your operating system you connect to. Therefore, when you connect
UD-731 with your computer, you need to install an appropriate driver for the UD-731
beforehand. Once you installed the driver properly, you do not need to install again from
the next time.
GPSView is multipurpose GPS utility. Please note that GPSView uses specific NMEA
sentences to display data graphically. For more information on NMEA, please see the
appendix 1.
GPSView is a general purpose utility for monitoring the output of a GPS
receiver. Using the NMEA data from the GPS receiver, GPSView will display various
statuses for evaluating GPS which including latitude, longitude, altitude, speed, azimuth,
fix mode and TTFF time. And also can be used to upgrade UniTraQ flash version GPS
receiver.
7.2 Install USB Driver
You need to prepare a PC to install USB driver. The USB driver category depending on
your operating system and then please follow the procedure illustrated below to install
USB driver. Please note this procedure is only for windows XP.
A.
Insert the CD into your CD-ROM disk. The installation program should automatically run. If,
the installation program does not initiate, double-click on GPS-Installation.EXE in the root
folder on the CD-ROM. When the main menu appears on the screen, just click on
USB-Driver for XP. If your operating system is vista, please click on USB-Driver for vista.
The installation will begin, and then the install wizard will navigate you to finish installation.
