8700
–
8701 TITANIUM
5
2.
C
ONFIGURING THE
T
ITANIUM USING THE WEB
INTERFACE
MINIMAL SYSTEM REQUIREMENTS
The WebGUI is supported by the following web browsers:
-
Google Chrome
-
Mozilla Firefox
-
Internet Explorer
-
Safari
Make sure to use the most recent version of the browser. When using a different
browser, we cannot guarantee a correct functioning of the interface.
LOGGING IN TO THE DEVICE
Plug one end of an Ethernet cable in the control port and the other end in a computer.
Once the Titanium is powered and fully booted, the module is reachable and ready to
be configured.
For a more reliable WebGUI connection, we advise to use fixed IP or DCHP.
Therefore, carefully follow the steps below:
1.
Set the computer to obtain an automatic IP address as explained in the
following procedure (for Microsoft Windows10®)
o
Navigate to the
Control Panel
(Start
Control Panel).
o
Enter the
Network and Sharing Center
and go to the
Adapter Settings
o
Right-click on the
Local Area Connection
and choose
Properties
.
o
Double click Internet Protocol Version 4 (TCP/IPv4) to enter the IP
settings of your adapter.
o
Make sure the
‘Obtain an IP address automatically’
checkbox is
selected.
o
Click
OK
to save the settings.
