TCS
Pro
500
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
4
INTRODUCTION
Congratulations on the purchase of your new UNITRON
TCS
Pro
500
. UNITRON instruments are engineered and
manufactured to the highest quality standards. UNITRON instruments are carefully inspected and tested by our
staff of trained technicians in our New York facility. Careful quality control procedures ensure each
TCS
Pro
500
is of
the highest quality prior to shipment.
UNPACKING AND COMPONENTS
Your
TCS
Pro
500
arrived packed in a molded Styrofoam container.
Do not discard the container
:
the Styrofoam
container should be retained for reshipment of your
TCS
Pro
500
if needed. Avoid placing the
TCS
Pro
500
in dusty
surroundings or in high temperature or humid areas as mold and mildew will form. Carefully remove the
TCS
Pro
500
from the Styrofoam container and place it on a flat, vibration-free surface and away from electromagnetic fields.
Your
TCS
Pro
500
comes with an A/C power cord and with a mini USB adapter.
CARING FOR THE CAMERA LENS
If dust is found on the camera lens, clean using canned air or an air bulb to remove dust or dirt that may have
accumulated on the lens surface.
If more persistent dust or dirt is found, please consult with an authorized UNITRON distributor for assistance. To
locate a UNITRON distributor near you, please call UNITRON at 631-543-2000.