Z650HR STEREO MICROSCOPE
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
7
For Microscopes Purchased
With Illuminated Stands
VOLTAGE CHECK
Confirm that the input voltage indicated on the
rear label of the microscope corresponds to your
line voltage. The use of a different input voltage
than indicated will cause severe damage to your
microscope.
Connecting the Power Cord (Fig. 4)
Turn the power switch
⑥
to the off position (O)
before connecting the power cord
⑦
.
Insert the power cord plug
⑦
into the power jack
of the microscope; make sure the connection is
snug.
Plug the power cord
⑧
into the power supply
receptacle.
Using the Glass Stage (Fig. 5)
Set the glass stage plate
⑨
on the center of the
base, and secure the slide with the two clips
⑩
.
Fig. 4
Fig. 5
