7
Installation
Important!
Installation and electrical wiring must be carried out by qualified personnel in accordance
with all applicable codes and standards.
Two people are required to install the cooker
hood.
Tools required to complete the installation:
•
Drill
•
Flat head screwdriver
•
Phillips head screwdriver
•
Tin snips
•
3/8” nut driver / ratchet with extension
•
Measuring tape
•
Hand saw / jig saw
•
Insulation tape
•
Duct tape
1. Remove the hood from the carton
2. Lay the hood upside down on a table
covered with cardboard or paper to prevent
damage to the hood or table
3. Hood installation should be within 0.8m
radius range
4. It is recommended that the bottom of the
hood is no less than 650mm and no more
than 750mm above the stove plates /
burners
.
1 Refer to Fig 8
Determine the position of the hood in the
cabinet.
The wood strips must line up with the 4 keyhole
slots on the top of the range hood.
On the cabinet, install 4 screws (supplied)
according to the relative position of the 4
keyholes on the bottom of the hood.
