background image

 

A symbol shown on the product, the instruction manual, or the packaging shows if it is 

suitable for recycling. 

Materials used inside the appliance are recyclable and are labelled with the relevant 

information. By recycling materials or other parts from used devices you are making a 

significant contribution to the protection of our environment. 

Information on appropriate disposal centers for used devices can be provided by your 

local authority. 

 

SPECIFICATIONS 

 

Model 

UGH02S 

Gas Type: LP Gas 

Operating pressure 

2,8kPa 

Total gas consumption: 424 g/H 

Semi Rapid Burner 

2.0KW 

Gas consumption:150 g/H 

Dual Wok Burner 

3.5KW 

Gas consumption:274 g/H 

Product Dimensions

 

Width 

510mm 

Depth 

300mm 

Aperture Dimensions

 

Width 

490mm 

Depth 

280mm 

 

 
INSTALLATION 

IMPORTANT INFORMATION FOR THE USER  

Read these instructions carefully before using the appliance and retain them for 
future reference. This appliance consumes oxygen when in use and it is important that 
it is only used in a well-ventilated area for the efficient performance of the appliance 
and for the safety of the occupants of the area.  
This appliance may only be installed by a registered LP Gas Installer. All registered 
installers are issued with a card carrying their registration number. Ask to be shown the 
card before allowing the installation work to commence and make a note of the Installer 
registration number. Upon completion of the installation, the installer is required to 
explain the operational details of the appliance together with the safety instructions. 
You will be asked to sign acceptance of the installation and be provided with a 
completion certificate. You should only sign for acceptance of the installation when the 
installation is completed to your satisfaction. Note that your invoice is required in the 
event that you wish to make a guarantee claim.

  

 

Summary of Contents for UGH02S













Reviews: