EN-42
Original User Guide | Pedelec Shimano Steps E8000 Version 1
6.3.1.6 Signal
The beeping tone which is heard when any button is pressed can be
deactivated.
1. Navigate to "Signal" as described in
5.7 Configuring settings in the
main menu Page EN-34
.
You can choose between:
ON
Activate acoustic signal
OFF
Deactivate acoustic
signal
2. Press the Display button to save the settings. You return to the main
menu.
Even when the acoustic signal is deactivated, a signal will
be heard when an operating error, system error, etc., occurs.
Beep
OFF
ON
Activate acoustic signal
Very rarely, certain equipment (televisions, PCs, radios,
etc.) or places (level crossings, TV broadcast stations,
radar stations, etc. ) can cause electromagnetic waves and
interference which can disrupt the transfer.
6.3.1.5 Brightness
You can adjust the brightness of the display to improve legibility:
1. Navigate to "Brightness" as described in
5.7 Configuring settings in
the main menu Page EN-34
.
You can choose between:
Brightness
Darker – Brighter
Selected
brightness
2. Use the
/ buttons to select the brightness required. The selected
brightness is shown in a framed box.
3. Press the Display button to confirm. You return to the main menu.
