UAD Powered Plug-Ins Manual
- 245 -
Chapter 20: EMT 250 Electronic Reverberator
Program Mode Controls
The details of each unique program mode are below, followed by descrip-
tions of the global controls, which affect all program modes.
Control
Functions
Table 17
displays the parameter that each control is mapped to for each of
the EMT 250 program modes. See
“Variable Control Functions” on
page 242
for details.
Program Mode
The Program Mode buttons define which of the available program modes is
active. The six program modes are: Reverb (REV), Delay (DEL), Phase (PHAS),
Chorus (CHOR), Echo, and Space (SPC).
Click a Mode button to activate that program mode; the button is illuminated
for the currently active mode (only one mode can be active at a time). Each
program mode and its associated parameters are described in detail below.
Tip:
See
Table 17 on page 245
for a matrix of controls that are available in
each program mode.
Table 17. The variable control functions of the EMT 250
Program Mode
Lever 1
Lever 2
Lever 3
Lever 4
Front/Rear
Reverb
Reverb Decay
LF Decay
HF Decay (damping)
Predelay
Output Pair
Delay
Coarse Delay Time
Fine Delay Time
Selects L/R channel
for time adjustment*
Predelay
Stereo/Mono
Phase
Phase (curve)
(none)*
(none)*
Predelay
Output Pair
Chorus
(none)*
(none)*
Variation
Predelay
Stereo/Mono
Echo
Coarse Delay Time
Fine Delay Time
HF Decay (damping)
Predelay
Input Mute
Space
(none)*
(none)*
(none)*
Predelay
Output Pair
*Note: The parameter values of lever positions marked with an asterisk are not saved in sessions or presets.
