UAD Powered Plug-Ins Manual
- 493 -
Chapter 48: RealVerb Pro
To adjust the timing of the early reflections:
1.
Drag the Amplitude control for the early reflections up or down (from
–80 dB to 0 dB) to affect the energy of the reflections. The Amplitude value
is indicated in the text field at the bottom of the Timing panel.
2.
Drag the Predelay control for the early reflections left or right (from
1–300 milliseconds) to affect the delay between the dry signal and the on-
set of early reflections. The Pre-delay time is indicated in the text field at the
bottom of the Timing panel.
Note:
The length in time of the early reflections cannot be adjusted from the
Timing panel, and instead is determined by the reverb’s shape and size (see
Figure 159
).
To adjust the timing of the late-field reverberations:
1.
Drag the Amplitude control for the late-field reverberations up or down
(from –80 dB to 0 dB) to affect the energy of the reverberations. The Am-
plitude value is indicated in the text field at the bottom of the Timing panel.
2.
Drag the Predelay control for the late-field reverberations left or right (from
1–300 milliseconds) to affect the delay between the dry signal and the on-
set of late-field reverberations. The Predelay time is indicated in the text
field at the bottom of the Timing panel.
Figure 162. RealVerb Pro Timing panel
Early
Reflections
display
Late-Field
Reverbera-
tions display
Amplitude
control
Predelay
control
Amplitude
Control
Predelay
control
Decay Time
control
Diffusion
control
