Creating the Power Macro
You can program the Power key on your
Kameleon-C6 Remote to turn on and off multiple
devices at the same time. You can command up to
six devices with one press of your Power key!
TO PROGRAM THE MACRO FOR THE
POWER KEY
1. Press the
Cable device mode key
.
2. Press
Setup
for at least 3 seconds. The bottom
of the IR indicator will blink twice.
3. Press
9 9 5
on the keypad. The bottom of the IR
indicator will blink twice.
4. Press the
Power key
.
5.
Press the mode key for the first device that
you want to program, followed by the mode
keys for each device you want to command
(up
to six devices).
6. Lastly, press
Setup
for at least 3 seconds. The
bottom of the IR indicator will blink twice.
Creating Other Macros
In addition to programming the Power key as a
Macro, you can program other custom keys on
your Kameleon-C6 Remote to conveniently per-
form a sequence of commands at the press of one
button. For example, if your cable system has a
VOD service that has information available on
channel 0-0-1, you can program the VOD key to
tune to this channel with one key press.
You can install a Macro on any key, except for the
Setup key and the devices mode keys (TV, CBL,
DVD, AUX, VCR, and Audio).
20 Creating the Power Macro
K
AMELEON
-C6 R
EMOTE
Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 20
