17
Volume Direct
The Volume Direct feature gives the
volume
+
/-
and
mute
buttons
the same function when the FOXTEL iQ Remote is in FOXTEL mode as
when it is in AV mode.
1.
Press the
av
button on the FOXTEL iQ Remote.
2.
Press and hold the select button, then press and hold the
red
button.
Keep both buttons held down until the LED on the FOXTEL iQ Remote
flashes twice.
3.
Press
9 9 3
(the LED will flash twice).
4.
Press the
av
button. The LED will flash twice to indicate that Volume
Direct feature has been set. The FOXTEL iQ Remote will now control
the volume of your television even when the FOXTEL iQ Remote is in
FOXTEL mode.
To reset the Volume Direct feature and have the
volume
+
/-
and
mute
buttons control the FOXTEL iQ, the following programming sequence needs
to be performed:
1.
Press the
av
button on the FOXTEL iQ Remote.
2.
Press and hold the
select
button, then press and hold the
red
button.
Keep both buttons held down until the LED on the FOXTEL iQ Remote
flashes twice.
3.
Press
9 9 3
(the LED will flash twice).
4.
Press the
volume
+
button. The LED will flash twice to indicate that
the Volume Direct feature has been reset. The FOXTEL iQ Remote will
now control the volume of the FOXTEL iQ when the FOXTEL iQ
Remote is in FOXTEL mode.
Volume Allocation
The Foxtel iQ Remote is able to be programmed so that, when in AV Mode, it
will control the volume of the television or amp/tuner. When in FOXTEL
mode it will control the volume of the FOXTEL iQ. If both television and
amp/tuner codes are programmed into the FOXTEL iQ Remote, it is
possible to switch between which one the FOXTEL iQ Remotes when
the
/-
and
mute
buttons are pressed. This function is called
Volume Allocation.
When both television and amp/tuner codes have been programmed:
1.
To switch to having the FOXTEL iQ Remote the volume of your
amp/tuner press and hold the
select
button then also press the
1
button for approximately two seconds.
2.
To switch to having the FOXTEL iQ Remote the volume of your
television press and hold the
select
button then also press
the
2
button for approximately two seconds.
Note: You must be in AV mode for this to function.
FOXTEL_PVR_opmaak 15-02-2006 09:50 Pagina 17
