13
•
Learned keys are mode-specific, so each one can
store a unique function for each mode.
•
Do not use the following keys for learning:
Device
Keys, SETUP, Record (•), Tune-In Keys
.
•
Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
•
Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
•
For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
NOTE:
Please have your original remote controls
handy before programming learning.
Programming a Learned Key
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
3.
Place the Atlas Shaw DVR/PVR 5-Device
Universal Remote Control head-to-head
(about 2" apart) from your original remote
control. Also locate the key (on your original
remote control) that you want the Atlas Shaw
DVR/PVR 5-Device Universal Remote Control
to learn.
4.
On the original remote, press and hold the key
to be learned. The Atlas Shaw DVR/PVR 5-
Device Universal Remote Control’s LED will
1.
Press
SETUP
until the last-selected device key
blinks twice, then press
9 7 5
.
NOTE:
If the LED displays one long flash instead,
either your batteries are low, or the Atlas Shaw
DVR/PVR 5-Device Universal Remote Control
has a memory fault. In either case, the remote
will not learn a new key. See “Additional Infor-
mation” on page 23.
2.
Press a device key once (i.e.,
AUX, DVD, AUD,
TV,
or
CBL
) to assign a mode for learning, then
the key that will learn the new code.
2"
Summary of Contents for M1055
Page 69: ...69 Vizio 1126 Voodoo 1272 ZT Group 1272 ...
Page 70: ...70 M11055 FS ...
