14
blink rapidly, then turn off. Continue holding
the key on the original remote until the Atlas
Shaw DVR/PVR 5-Device Universal Remote
Control’s LED blinks twice.
NOTE:
If the LED displays one long blink, a learning
error has occurred. Try repeating this step
again until a successful capture occurs. If the
function is
still not captured, press and hold
SETUP
to exit programming and review the
“Learning Precautions” on the previous page.
If needed, also see “Troubleshooting” on
page 21. After review, start programming
again at step 1.
Deleting a Single Learning Key
This process returns the key to its original programming
for the mode you select. You can also delete learned
programming by teaching a different function to the key
(see “Programming a Learned Key” on page 13)
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
3.
Press the key containing the learned function
to be deleted twice. The remote will blink
twice.
Deleting All Learned Keys in a Specific Mode
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
5.
Repeat steps 2 through 4 for another device
and/or key or press and hold
SETUP
to exit
programming.
1.
Press
SETUP
until the last-selected device key
blinks twice, then press
9 7 6
.
2.
Press a device key once (i.e.,
AUX, DVD, AUD,
TV,
or
CBL
).
4.
Repeat steps 2 through 3 for another key or
press and hold
SETUP
to exit programming.
1.
Press
SETUP
until the last-selected device key
blinks twice, then press
9 7 6
.
Summary of Contents for M1055
Page 69: ...69 Vizio 1126 Voodoo 1272 ZT Group 1272 ...
Page 70: ...70 M11055 FS ...
