18
PROGRAMMING ID LOCK
TheAtlas Shaw DVR/PVR 5-Device Universal Remote
Control is locked at the factory to operate a Scientific
Atlanta cable converter. However, if you have another
brand or model of cable converter or satellite service
that you would like to control, then you’ll need to
perform the following steps to unlock the ID Lock, enter
a new manufacturer’s code, and lock the ID Lock again.
1.
Turn on the cable converter.
4.
Perform the instructions under
“Programming Device Control” on page 8 to
program device control for the desired cable
converter or satellite receiver.
When you are done, perform steps 5 and 6 on
this page to again lock the ID Lock.
USING THE MASTER POWER KEY
The Atlas Shaw DVR/PVR 5-Device Universal Remote
Control has a unique feature that allows you to
sequentially turn up to five of your home entertainment
devices on or off with a single key press.
NOTE:
MASTER POWER (PWR)
only works in the
CBL
mode. If it is not programmed, only the cable
converter will turn on or off. In any other
mode, pressing
MASTER POWER (PWR)
once
will turn the selected device on or off.
2.
On the remote control, press
CBL
once; it will
blink once. Then press and hold
SETUP
until
the
CBL
key blinks twice.
3.
Enter
9 8 2
. The
CBL
key will blink four
times, indicating ID Lock is unlocked.
5.
On the remote control, press
CBL
once; it will
blink once. Then press and hold
SETUP
until
the
CBL
key blinks twice.
6.
Enter
9 8 2
. The
CBL
key will blink twice,
indicating ID Lock is again locked.
Summary of Contents for M1055
Page 69: ...69 Vizio 1126 Voodoo 1272 ZT Group 1272 ...
Page 70: ...70 M11055 FS ...
