11
5.
For future reference, write down each working
device code in the boxes below:
TV/VCR Code
TV Code (if used)
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
theAtlas DVR/PVR IR/UHF Remote after trying all of
the codes listed for your brand, or if your brand is not
listed at all, try searching for your code.
For example, to search for a code for your TV:
1.
Turn on your TV.
4.
Aim the remote control at your TV/VCR
Combo and press
PWR
once. The device
should turn off. If it does not respond, repeat
steps 2 through 3, trying each code listed for
your brand until you find one that works. If it
still does not respond, try searching for the
code (“Searching for Your Code” starting on
page 11).
2.
On the remote control, press
TV
once; it blinks
once. Then press and hold
SETUP
until the
TV
key blinks twice.
3.
Enter
9 9 1
. The
TV
key blinks twice.
4.
Aim the remote control at the TV and press
PWR
once.
5.
Press
CH+
one or more times and stop when
the TV turns off.
NOTE:
In the search mode, the remote control sends
IR codes from its library to the selected
device, starting with the most popular code
first.
6.
Press
SETUP
once to lock in the code. The
TV
key blinks twice.
