13
•
Learned keys are mode-specific, so each one can
store a unique function for each mode.
•
Do not use the following keys for learning:
Device
Keys, SETUP, Record (•), Tune-In Keys
.
•
Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
•
Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
•
For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
NOTE:
Please have your original remote controls
handy before programming learning.
Programming a Learned Key
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
3.
Place the Atlas DVR/PVR IR/UHF Remote
head-to-head (about 2" apart) from your
original remote control. Also locate the key
(on your original remote control) that you
want the Atlas DVR/PVR IR/UHF Remote to
learn.
4.
On the original remote, press and hold the key
to be learned. The Atlas DVR/PVR IR/UHF
Remote’s LED blinks rapidly, then turn off.
1.
Press and hold
SETUP
until the last-selected
mode key blinks twice, then press
9 7 5
.
NOTE:
If the LED displays one long flash instead,
either your batteries are low, or the Atlas DVR/
PVR IR/UHF Remote has a memory fault. In
either case, the remote does not learn a new
key. See “Additional Information” on page 25.
2.
Press a mode key once (i.e.,
MTS, TV, DVD,
AUD,
or
AUX
) to assign a mode for learning,
then the key that learns the new code.
2"
