16
TV
, so you can control TV volume while in the
AUX
,
DVD
,
TV
or
MTS
mode. You can perform Individual Volume
Unlock on a selected device to set its volume control for
independent operation.
NOTE:
The audio mode’s (
AUD
) volume controls are
active regardless of Volume Lock settings.
However, if you lock the volume controls to
the
AUD
mode, you will have control of the
audio device’s volume in all other modes (i.e.,
AUX
,
DVD
,
TV
, and
MTS
). This can be an advan-
tage if, for example, you always listen to home
entertainment devices through your receiver’s
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
4.
Repeat steps 1 through 3 for each device you
want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g.,
MTS
), pressing
VOL+
,
VOL-
, or
MUTE
, controls only
that device’s volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE:
Performing these instructions sets indepen-
dent volume control for all programmed
devices.
1.
Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g.,
MTS
) and press it once. Next,
press and hold
SETUP
until the device key
blinks twice.
2.
Enter
9 9 3
. The last-selected device key
blinks twice.
3.
Press
VOL-
once. The last-selected device key
blinks four times.
1.
On the remote control, press and hold
SETUP
until the last-selected device key blinks twice.
2.
Enter
9 9 3
. The last-selected device key
blinks twice.
3.
Press
VOL+
once. The last-selected device key
blinks four times.
