Your
Navigator requires four (4) new AAA alkaline
batteries. To install the batteries:
1.
On the back of the
Navigator, pull back
on the tab and lift the battery cover off.
2.
Match the + and - marks on the batteries
to the + and - marks in the battery case,
then insert the batteries.
3.
Press the battery cover back into place.
4.
Test the unit by pressing POWER. If the
batteries are inserted correctly, the red
light (LED) will blink once.
NOTE: Removing the batteries WILL NOT require you to
reprogram your Navigator. The red light will blink 5 times
with each key press when the batteries need replacing.
The
Navigator Remote Control
UNIVERSAL REMOTES
Overview
The
Navigator requires four new AAA alkaline batteries.
The
Navigator can operate any combination of four
devices including Cable Converters, TVs, VCRs, CD
Players, Stereo Amplifiers, Receivers and Digital Audio
Service. The
Navigator is designed to operate all of the
functions of your Cable Converter as well as all of the
basic functions of your other original remotes. You will
need this manual to setup your new
Navigator, so please
be sure to keep it.
Features And Functions of the
Navigator
The
Navigator was designed with all of the functions of
your Cable Converter as well as all of the most common
functions for your other equipment. The following
illustration and key chart describes the basic functions of
the
Navigator remote control.
PAGE
PAGE
PAUSE
SELECT
REC
TV/VCR
STOP
PLAY
FF
REW
GUIDE
VOL
CH
EXIT
INFO
LAST
POWER
SETUP
CABLE
VCR
TV
AUDIO
MUTE
ENTER
MENU
+
+
-
-
. . . . .
. . .
.
Navigator Basic Functions
The LED flashes red to show that the
remote is working.
The SETUP key is used to program your
Navigator.
The POWER key operates the POWER ON
and OFF for your Cable Converter, TV,
VCR, and Audio Components. Please note
that most CD Players do not have an ON/
OFF function. If this is the case with your
CD Player, then POWER will have no effect
on your CD Player.
The CABLE, TV, VCR, and AUDIO (CD,
Amp, Receiver or Digital Audio Service)
keys are used to select the home
entertainment component you want to
control.
The ENTER key operates the same as the
ENTER key on your original remote. In the
AUDIO mode, the ENTER key will operate
the Source/Mode Select/Input function.
The VOL +/- (Volume Up/Down) and MUTE
keys operate the VOLUME UP/DOWN and
MUTE of your home entertainment
components.
The CH+/- (Channel Up/Down) keys
operate the Channel Up and Down feature
of your home entertainment components. If
you are controlling a Receiver, the CH +/-
keys may operate the /- feature. If
you are controlling a CD Player, the CH +/-
keys operate the Track +/- feature. If you
are controlling a Digital Audio Service Box,
the CH +/- operates Audio C/- or
/-.
The LAST (Last Channel) key operates the
PREVIOUS CHANNEL or LAST CHANNEL
RECALL feature for your Cable Converter,
TV and VCR. Please note that most VCRs
do not have a LAST or PREVIOUS
CHANNEL feature. If this is the case with
your VCR, then LAST will not have any
function in the VCR mode.
The INFO key operates the Display feature
for your TV, VCR, CD Player or Digital Audio
Service Box.
The Digit keys (0 – 9) operate the same as
the digit keys on your original remote. If you
are operating an Amp or Receiver, then the
digit keys will perform the following
functions; 0=CD, 1=Tuner, 2=LD/VDP,
3=Tape 1, 4=Tape 2, 5=Video, 6=Video 2,
7=Aux, 8=TV and 9=Phono.
The REC (Record), PAUSE, REW
(Rewind), PLAY, FF (Fast Forward), STOP
and TV/VCR keys operate the same as the
keys on your original VCR and CD Player
remote. As a safety feature on the
Navigator, you must press the REC key
twice.
The Cable Interactive and Cable keys
control the functions of your Cable
Converter and will vary depending on the
manufacturer of your Cable Converter.
Please refer to your Cable Converter’s
Manual for key descriptions.
Installing the Batteries
POWER
Setting Up Your Components
To program the
Navigator to operate your TV:
Look at the brand name of your TV and then write it in the
space below.
TV Brand: _____________________________________
Locate the brand name of your TV in the “SETUP CODES
FOR TVs” section. The brands are listed in alphabetical
order with the most popular codes listed first. You will use
one of these codes to program your
Navigator to operate
your TV.
To program the
Navigator to operate your TV:
1.
Turn on your TV.
2.
Press TV and release. Press and hold SETUP
until the
Navigator’s red light blinks twice, then
release SETUP.
3.
Enter the first three-digit TV code listed in the
“SET UP CODES FOR TVs” section. If you
perform this procedure correctly, the red light
will blink twice.
4.
Aim the
Navigator at your TV and press
POWER. Your TV should turn off. If your TV
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one
that operates your TV. If you still cannot get
your TV to work with the
Navigator, try
searching for your code as outlined in the
“Searching For Your Code” section.
5.
Your
Navigator is now programmed to
operate your TV. Write your TV code
in the boxes to the left for future
reference.
Remember, if you want to use your
Navigator to operate
your TV, press the TV key first.
NEC
030, 019, 056
Nikko
092, 030, 178
Noblex
430
Noshi
018
NTC
092
Onwa
180
Optimus
154, 166, 250
Optonica
093, 165
Orion
236
Panasonic
250, 051, 055
Penney
047, 051, 156, 178,
030, 019, 060, 003,
018, 021, 027, 032,
039, 135
Philco
054, 096, 145, 019,
020, 028, 030
Philips
054
Pilot
019, 030, 039
Pioneer
166, 038
Portland
092, 019, 039
Prism
051
Proscan
047
Proton
003, 052, 178
Pulsar
017, 019
Quasar
250, 051, 055, 165
RadioShack 047, 056, 154, 165,
178, 180, 019, 030,
409, 032, 039
RCA
047, 018, 019, 029,
038, 090, 135, 174
Realistic
056, 154, 165, 019,
030, 178, 180, 032,
039
Rhapsody
185
Runco
017, 030
Sampo
030, 052, 032, 039
Samsung
060, 019, 030, 056,
178, 032, 039
Samsux
039
Sansui
451
Sanyo
154, 159, 484, 146
Scimitsu
019
Scotch
178
Scott
236, 019, 178, 179,
180
Sears
047, 054, 056, 154,
156, 171, 178, 179,
159, 146
Semivox
180
Semp
156
Sharp
093, 165, 157, 386,
039
Shogun
019
Signature
016
Simpson
186, 187
Sony
000
Soundesign 178, 179, 180, 186
Spectricon
003
Squareview 171
SSS
019, 180
Starlite
180
Supre-Macy 046
Supreme
000
Sylvania
054, 096, 020, 028,
030, 381
Symphonic
171
Tandy
093
Tatung
055, 003
Technics
250, 051
Technol Ace 179
Techwood
056, 003, 051
Teknika
092, 150, 054, 056,
060, 016, 019, 179,
180, 186, 039
Telefunken
056
TMK
056, 177, 178
Toshiba
156, 154, 060
Tosonic
185
Totevision
039
Trical
157
Universal
027
Vector
Research
030
Victor
053
Vidikron
054
Vidtech
019, 178
Viking
046
Wards
030, 054, 056, 096,
165, 019, 016, 020,
021, 027, 028, 029,
174, 178, 179
Yamaha
019, 030
Zenith
017, 092, 016
Zonda
003
SETUP CODES FOR TVs
A-Mark
003
Abex
032
Admiral
093
Adventura
046
Aiko
092
Akai
030
Alaron
179
Ambassador 177
Anam
180
Anam
National
055
AOC
030, 019, 003, 052,
185
Archer
003
Astro Text
379
Audiovox
180, 003
Baysonic
180
Belcor
019
Bell & Howell 154, 016
Bradford
180
Brockwood
019
Broksonic
236, 436, 180, 003
Candle
030, 056, 186, 046
Carnivale
030
Carver
054
CCE
217
Celebrity
000
Cineral
092, 451
Citizen
030, 056, 060, 092,
186, 280, 039, 046
Clairtone
185
Concerto
056
Contec
157, 158, 180, 185
Craig
180
Crown
180, 039
Curtis
Mathes
030, 060, 154, 039
CXC
180
Daewoo
451, 092, 019, 039
Daytron
019
Denon
145
Dumont
017, 019
Electroband 000, 185
Electrohome 381, 389, 409
Emerson
236, 463, 019, 154,
158, 177, 178, 179,
180, 185, 280, 282,
038, 039
Envision
030
Fisher
154, 159
Fujitsu
179
Funai
171, 179, 180
Futuretech
180
GE
047, 051, 451, 021,
027, 029, 055, 178,
282, 135, 174
Gibralter
017, 019, 030
Goldstar
056, 019, 030, 178,
409, 032, 039
Gradiente
056, 392, 053
Grunpy
180, 179
Hallmark
178
Harman/
Kardon
078
Harvard
180
Hitachi
145, 151, 056, 409,
032, 038
Infinity
054
Janeil
046
JBL
054
JCB
000
JVC
053
Kawasho
158
Kaypani
052
KEC
180
Kenwood
019, 030
Kloss
024, 046, 078
KTV
030, 180, 185, 217,
280, 039
LG
056
Logik
016
Luxman
056
LXI
047, 054, 154, 156,
178
Magnavox
054, 096, 186, 187,
020, 024, 028, 030,
386
Majestic
016
Marantz
054, 030
Matsushita
250
Megatron
145, 003, 178
MEI
185
Memorex
056, 150, 154, 178,
016
MGA
150, 019, 030, 178
Midland
017, 032, 039, 047,
051, 135
Minutz
021
Mitsubishi
150, 019, 093, 178
Motorola
093, 055
MTC
019, 030, 056, 060,
185
Multitech
180, 217
NAD
156, 166, 178
Davidson
000
Harman/
Kardon
038, 075
Harwood
068, 072
Headquarter 046
HI-Q
047
Hitachi
042, 000, 041, 065,
105, 166
Jensen
041
JVC
041, 008, 067, 206
KEC
037, 278
Kenwood
041, 038, 067
KLH
072
Kodak
035, 037
Lloyd’s
000, 208
Logik
072
LXI
037
Magnavox
035, 081, 039, 149
Magnin
240
Marantz
035, 081
Marta
037
Matsushita
162, 035
MEI
035
Memorex
035, 037, 104, 240,
039, 000, 046, 047,
048
MGA
043
MGN
Technology 240
Minolta
042, 105
Mitsubishi
043, 067, 075, 173
Motorola
035, 048
MTC
000, 240
Multitech
000, 072
NAD
058
NEC
038, 040, 041, 067,
104
Nikko
037
Nikon
034
Noblex
240
Olympus
035, 226
Optimus
037, 048, 104, 162,
058, 432
Optonica
062
Orion
184, 209, 295, 479
Panasonic
162, 035, 226
Penney
035, 037, 240, 038,
040, 042, 054
Pentax
042, 065, 105
SETUP CODES FOR VCRs
Admiral
048
Adventura
000
Aiko
278
Aiwa
000, 037
Akai
041, 049, 053, 106
American
High
035
Asha
240
Audiovox
037
Beaumark
240
Bell & Howell 104
Broksonic
209, 121, 184, 479,
211, 295, 361
Calix
037
Canon
035
Capehart
020
Carver
081
CCE
072, 278
Citizen
037, 278
Colt
072
Craig
037, 047, 072, 240,
271
Curtis
Mathes
035, 041, 060
Cybernex
240, 051
Daewoo
278, 020, 045
Daytron
020
Denon
042
Dynatech
000
Electrohome 037
Electro-
phonic
037
Emerex
032
Emerson
184, 209, 479, 037,
002, 278, 294, 000,
043, 121, 068, 036,
088, 208, 211, 212,
295, 361
Fisher
104, 054, 047, 066
Fuji
033, 035
Funai
000
Garrard
000
GE
060, 202, 035, 065
Go Video
232, 279, 432
Goldstar
037, 038
Gradiente
000
Harley
Unitech
240
Vector
045
Vector
Research
038, 040
Video
Concepts 040, 045
Videosonic
240
Wards
000, 035, 042, 047,
048, 240, 060, 062,
072, 081, 149, 212
XR-1000
000, 035, 072
Yamaha
038
Zenith
039, 033, 034
Set-Up Codes for
TV/VCR Combos
American
High
035*
Brocksonic
002, 294, 479
Colt
072
Curtis
Mathes
035*
Daewoo
278
Emerson
002, 294, 479
Funai
000
GE
035*, 060*, 048*, 240
Hitachi
035*, 000
HQ
000
Lloyds
000
MGA
240
Magnavox
000, 035*, 081*
Magnin
240
Memorex
037, 162*
Mitsubishi
048*
Orion
002, 294, 479
Panasonic
035*, 162*
Penney’s
035*, 240, 162*
Quasar
035*, 162*
RCA
035*, 060*, 048*
Sansui
000, 479
Sanyo
240
Sears
000, 037
Symphonic
000
Zenith
000
Philco
035
Philips
035, 081, 062
Pilot
037
Pioneer
058, 067
Portland
020
Profitronic
240
Protec
072
Pulsar
039, 051
Quarter
046
Quartz
046
Quasar
162, 035
RadioShack 000, 037
Radix
037
Randex
037
RCA
060, 202, 042, 065,
105, 106, 149
Realistic
000, 048, 104, 035,
037, 046, 047, 062,
066
Ricoh
034
Runco
039
Salora
075
Samsung
240, 045, 051, 053
Sanky
039, 048
Sansui
041, 067, 271, 479
Sanyo
104, 046, 047, 240
Scott
184, 043, 045, 121,
210, 211, 212
Sears
104, 035, 037, 042,
046, 047, 054, 066,
105
Sharp
048, 062
Shintom
072
Shogun
240, 051
Singer
072
Sony
032, 033, 034, 035
STS
042
Sylvania
035, 081, 000, 043
Symphonic
000
Tatung
041
TEAC
000, 041
Technics
162, 035
Teknika
000, 035, 037
TMK
240, 036, 208
Toshiba
045, 043, 366, 066,
210, 212, 366
Totevision
037, 240
NOTE: If your TV/VCR is working on one of the above
codes highlighted with an asterisk (*), you may need to
program a separate TV code in order to control the volume.
Check the list of codes below and follow the instructions
detailed in the “To Program the Navigator to Operate Your
TV” section to program the supplied TV code.
TV/VCRs working on VCR code 035 may require TV code
051 for volume control.
TV/VCRs working on VCR code 048 may require TV code
093 for volume control.
TV/VCRs working on VCR code 060 may require TV code
047 for volume control.
TV/VCRs working on VCR code 081 may require TV code
054 for volume control.
TV/VCRs working on VCR code 162 may require TV code
250 for volume control.
To program the
Navigator to operate your Cable
Converter:
Look at the brand name of your Cable Converter and then
write it in the space below.
Cable Brand:
Locate the brand name of your Cable Converter in the
“SETUP CODES FOR CABLE CONVERTERS” section.
The brands are listed in alphabetical order with the most
popular codes listed first. You will use one of these codes
to program your
Navigator to operate your Cable
Converter.
When you received your
Navigator, it was already
programmed to operate your Cable Converter. You should
not have to reprogram your
Navigator. The following
instructions will allow you to change the code for your
Cable Converter or to program a DBS Satellite. Before you
can program the CABLE key, you will need to unlock it. To
unlock the CABLE key:
1.
Press and release CABLE.
2.
Press and hold SETUP until the
Navigator’s red
light blinks twice. Release SETUP.
3.
Press 9 - 9 - 7. The
Navigator’s red light will
blink twice.
VOL
+
-
MUTE
CABLE
TV
VCR
AUDIO
ENTER
SETUP
POWER
CH
+
-
LAST
INFO
0 - 9
0 - 9
REC
PAUSE
REW
PLAY
FF
STOP
TV
SETUP
POWER
VCR
SETUP
To program the
Navigator to operate your VCR:
Look at the brand name of your VCR and then write it in
the space below.
VCR Brand:
Locate the brand name of your VCR in the “SETUP
CODES FOR VCRs” section. The brands are listed in
alphabetical order with the most popular codes listed first.
You will use one of these codes to program your
Navigator
to operate your VCR.
To program the
Navigator to operate your VCR:
1.
Turn on your VCR and insert a tape.
2.
Press VCR and release. Press and hold
SETUP until the
Navigator’s red light blinks
twice, then release SETUP.
3.
Enter the first three-digit VCR code listed in
the “SET UP CODES FOR VCRs” section. If
you perform this procedure correctly, the red
light will blink twice.
4.
Aim the
Navigator at your VCR and press
POWER. Your VCR should turn off. If your
original VCR remote control did not have a
POWER key, press PLAY. Your VCR should
start to play. If your VCR does not respond,
repeat steps 2-4, trying each code listed for
your brand until you find the one that operates
your VCR. If you still cannot get your VCR to
work with the
Navigator, try searching for your
code as outlined in the “Searching For Your
Code” section.
5.
Your
Navigator is now programmed
to operate your VCR. Write your
VCR code in the boxes to the left for
future reference.
Remember, if you want to use your
Navigator to operate
your VCR, press the VCR key first.
POWER
PLAY
SETUP
CABLE
9 - 9 - 7
9 - 9 - 7
PAGE
PAGE
SELECT
GUIDE
MENU
TV/VCR
X
X
X
X
X
X
X
X
X
X
X
X
