www.urcsupport.com
10
1.
Turn on your TV.
4.
Enter one of the following four digits:
8.
To search for the codes of your other devices,
repeat steps 1 through 6, but substitute the
appropriate key (e.g.,
AUX, DVD, AUD,
or
STB
)
for the device you are searching for.
2.
On the remote control, press
TV
once; it blinks
once. Then press and hold
SETUP
until the
TV
key blinks twice.
3.
Enter
9 9 1
. The
TV
key blinks twice.
COMPONENT TYPE
COMPONENT ID #
Set-Top Boxes (Cable, Sat, etc.)
0
TV
1
DVD/VCR/DVR
2
Audio Devices
3
5.
Aim the remote control at the TV and press
POWER
once.
6.
Press and release the
CH+
key continuously,
then stop when the TV turns off.
NOTE:
In the search mode, the remote control sends
IR codes from its library to the selected
device, starting with the most popular code
first.
7.
Press
POWER
. The TV should turn on, then
press
SETUP
to lock in the code.
NOTE:
If the TV does not turn on during step 6, then
slowly press and release
CH-
to go back
through the codes. Press
SETUP
when the TV
turns on.
SETUP
Titan OCAP Remote Control.fm Page 10 Tuesday, May 27, 2008 1:55 PM
Summary of Contents for Titan
Page 55: ...www urcsupport com 55 NOTES ...
Page 56: ...M2056 C Revision 1 0 ...
