www.urcsupport.com
23
TROUBLESHOOTING
PROBLEM:
Device mode key does not blink when you
press a key.
SOLUTION:
Replace the batteries with two (2) new AA
batteries (see “Installing Batteries” on page 7).
PROBLEM:
Device key blinks when you press a key, but
home entertainment device does not respond.
SOLUTION:
Make sure you are aiming the remote control
at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM:
The remote control does not control home
entertainment devices or commands are not performing
properly.
SOLUTION:
Try all listed codes for the device brand
being set up. Make sure all devices can be operated with
an infrared remote control.
PROBLEM: PLAY
and
STOP
keys do not work on a
Motorola DCT-2000 cable converter.
SOLUTION:
Re-program the CBL key for cable code 0476
(see “Basic Setup: Programming Device Control” on
page 8).
PROBLEM:
Tried Search Method and still could not find
a working code.
SOLUTION:
Try the Search Method again after clearing
out the device key as follows:
a. Press and hold
SETUP
until device key blinks twice.
b. Enter
9 9 2
.
c. Press and release the device key to be cleared twice.
PROBLEM:
Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION:
For power on, these products require
programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 0032. For Sharp, use
TV code 0093 and VCR code 0048.
Titan OCAP Remote Control.fm Page 23 Tuesday, May 27, 2008 1:55 PM
Summary of Contents for Titan
Page 55: ...www urcsupport com 55 NOTES ...
Page 56: ...M2056 C Revision 1 0 ...
