11
PROGRAMMING A MASTER POWER MACRO (cont’d)
Clearing The Master Power Macro
1.
Press and hold
SET
until the
LED
(red light) blinks twice,
then release
SET
.
2.
Enter
9
-
9
-
5
. The
LED
will blink twice. Then press
POWER
once.
3.
Press and hold
SET
until the
LED
blinks twice, then release
SET
. The
Master Power Macro
is now cleared.
RE-ASSIGNING DEVICE KEYS
The One For All 3 Device Universal Remote Control can be set to control a
DVD player and a VCR (or a PVR) or a second DVD player by re-assigning
the unused
CBL/SAT
key as follows:
1.
On the remote control, press and hold
SET
until the
LED
(red light) blinks twice, then release
SET
.
2.
Enter
9
-
9
-
2
. The
LED
will blink twice.
3.
Press
DVD/VCR
once.
4.
Press
CBL/SAT
once.The
LED
will blink twice.The
CBL/SAT
key
is now ready to be set up to control your VCR (or PVR) or
second DVD player.See
Programming Device Control
on page
8.
NOTE: Only one device can be assigned to an unused device key at a time.
USING CHANNEL SCAN
In the
CBL/SAT
or
TV
mode, use the
FAV
key to start a 3-second scan of all
channels. Or, if programmed, use the
FAV
key to scan only your favorite
channels to view a desired channel (see
Programming Favorite Channel Scan
on next page. )
1.
Press
CBL/SAT
or
TV
once.
2.
Press
FAV
once.
•
If
Favorite Channel Scan
has been set up, scanning of favorite
channels will start with up to 100 channel changes or until
stopped by pressing any key.
•
If
Favorite Channel Scan
has not been set up, scanning
will start with the current channel, and continue up to
100 channel changes or until stopped by pressing any key.
3.
To stop scanning channels at any time, press any key once.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 11
