13
CHANGING VOLUME LOCK (cont’d)
Locking Volume Control To One Mode
(Global Volume Lock)
2.
Enter
9
-
9
-
3
and then press any mode key once (e.g.,
TV
).
The
LED
will blink twice.
3.
Now, when you press
VOL
▲
,
VOL
▼
, or
MUTE
, the volume of
the selected device (e.g.,
TV
) will be controlled, regardless
of the mode you have selected.
Unlocking Volume Control For A Single Device (Individual Volume
Unlock)
1.
After performing
Global Volume Lock
(above), press a desired
mode key where you want volume to be unlocked (e.g.,
DVD/VCR
) and controlled within its own mode.
2.
Press and and hold
SET
until the
LED
(red light) blinks twice,
then release
SET
.
3.
Enter
9
-
9
-
3
and then press
VOL
▼
once. The
LED
will
blink four times.
4.
If desired, repeat steps 1 through 3 (of this section) for
each device that you want volume to be unlocked.
5.
After selecting a device that has volume unlocked (e.g.,
DVD/VCR
), pressing
VOL
▲
,
VOL
▼
, or
MUTE
will control the
device’s volume only in its own mode.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro-
grammed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode,
etc.).
1.
On the remote control, press and hold
SET
until the
LED
(red
light) blinks twice, then release
SET
.
2.
Enter
9
-
9
-
3
and then press
VOL
▲
once. The
LED
will
blink four times.
3.
Volume will again be independently controlled according
to its default states for all programmed devices.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 13
