8
PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box. To control devices other than the default brands, perform the fol-
lowing steps; otherwise skip this section:
1.
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2.
On the remote control, press a device key once (i.e.,
DVD/VCR
,
CBL/SAT
, or
TV
).
NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo,
or TV/VCR/DVD Player Combo press
DVD/VCR
once. After program-
ming a VCR Combo device, you will be able to control channel selec-
tion, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR
Combo, or TV/DVD Player Combo, press
DVD/VCR
once. After pro-
gramming a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press
CBL/SAT
once.
3.
Press and hold
SET
until the
LED
(red light) blinks twice,
then release
SET
.
4.
Use the
Manufacturer’s Codes
(starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed cor-
rectly, the
LED
will blink twice.
NOTE: If the
LED
did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5.
Aim the remote control at the device and press
POWER
once. The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page
.
NOTE: If the device does not have a
POWER
key, press
PLAY
.
6.
Repeat steps 1 through 5 for each device you want to con-
trol.For future reference, write down each working device
code in the following boxes:
DVD/VCR
Code:
Device Type:__________________
CBL/SAT
Code:
Device Type:__________________
TV
Code:
Device Type:__________________
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 8
