input for your box is 1314. To enter this number you would first press
Vol +
to
enter the number 1, then press
Ch + to enter the number 3, then Vol + to
enter the number 1 again and, finally,
Ch - to enter the number 4.
Now, using the above example, follow the remaining steps:
1. With pen and paper in hand, refer to the Codes section beginning on page 7
and look for your brand of cable box and TV. Write down all possible codes for
both your cable box and TV. This will make the following steps easier.
2. With all codes in front of you, turn on your cable box and complete the
following:
a. Press and release the
Cable key.
b. Press the
Setup key until the red LED light blinks twice, then release
key.
4
Penney
1123, 1213,
1124, 1134,
1122, 1222,
1114, 1133
Philco
1132, 1234,
1122, 1144,
1114
Philips
1132
Pilot
1122, 1114
Pioneer
1214, 1244
Portland
1114, 1142
Princeton
1312
Prism
1124
Proscan
1123
Proton
1222
Pulsar
1113, 1114
Quasar
1124, 1232
RCA
1123, 1124,
1143, 1114,
1244
Radio Shack
1123, 1212,
1224, 1122,
1222, 1114,
1133
Realistic
1212, 1224,
1122, 1222,
1114, 1133
Runco
1113, 1122
SSS
1224, 1114
Sampo
1122
13
Watch Remote Manual.0814.qxd 8/14/01 4:49 PM Page 6
