Installation & Set-up Guide
30
Figure 4
Figure 5
Figure 6
Step 3 – Printing to your ILS System (Materials Database Tab)
You will be using the Materials Database Tab in the printer
driver. Other graphic software programs may differ.
Verify that the UCP
1.
is running in the
taskbar.
When you are ready to print the job, click FILE
2.
and then click PRINT. Make sure that your laser
system appears in the DESTINATION NAME
dropdown list, and then click PROPERTIES (Figure
4) to display the ILS system printer driver settings
(Figure 5).
Choose your material, in this case metal, and
3.
then select the correct material type: Aluminum
Anodized (Figure 5).
Set the Fixture Type to NONE.
4.
Note:
If you were using an optional accessory
or custom fixture, you would choose it from the
fixture list.
Measure the thickness of the material (we
5.
recommend using calipers) and enter it in the
material thickness field. In the example, the
provided anodized aluminum is 0.019” (0.483
mm) thick.
Click OK when done.
6.
Now click on PRINT in the Print dialog window
7.
(Figure 4).
Click on the ILS system icon on the taskbar and
8.
the current print job will appear in the Viewer
Tab of the Universal Control Panel (Figure 6).
Now click on the System Tab and verify that the
9.
Auto Z box is checked.
Return to the Viewer Tab and proceed to the next
10.
step.
Summary of Contents for Industrial ILS12.150D
