(15)
♦
♦
♦
♦
Idler gear
Secure the idler gear shaft to the engine block with 3
capscrews, torque to 17 to 20 ft-lbs (2.4 to 2.8 kg-m) and
bend tabs of tab washer. Install gear as shown, make sure it
runs freely, has a running clearance of 0.001 to 0.002 in.
(0.020 to 0.054 mm) and 0.008 to 0.020 in. (0.20 to 0.51 mm)
end play.
♦
♦
♦
♦
Injection pump camshaft
Injection pump camshaft, Fig. 37. Install the bearings and
governor unit on the camshaft and install in the engine block
Hour Meter Unit, Fig. 37. Insert the “tang’ on the end the hour
meter drive shaft into the slot on the end of the injection
pump camshaft and install as per the illustration.
NOTE
* Hour meter unit is optional parts.
Summary of Contents for Universal diesel 5416
Page 21: ...19...
