19
To Clear The Master Power Key:
1.
Perform steps 1 and 2 in the first section
above,
To Program The Master Power Key
.
2.
To clear the settings and exit the program,
press and hold
SETUP
until the
CBL
key blinks
twice, then release
SETUP
.
RE-ASSIGNING DEVICE KEYS
The Atlas DVR/PVR 5-Device Universal Remote Control
can be set up to control a second device. For example,
to have the unit control a TV, a Cable Converter, and
two
DVD Players, you will need to re-assign the unused
AUX
key to operate the second DVD Player as follows:
NOTE:
AUX
is preset at the factory to control an RCA VCR.
Performing the below steps will overwrite those settings.
1.
On the remote control, press
AUX
once; it will
blink once. Then press and hold
SETUP
until
the
AUX
key blinks twice, then release
SETUP
.
2.
Enter
9
-
9
-
2
. The
AUX
key will blink twice.
3.
Press
DVD
once, then press
AUX
once. The
AUX
key will blink twice.
4.
The
AUX
key is now ready to be programmed
for your second DVD player. See
Programming
Device Control
on page 10.
To re-assign other device keys, repeat steps 1 to 4 and
substitute the key sequence using the following chart:
NOTE: Only one device can be assigned to an unused device key
at a time.
continued on next page...
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 19
