20
RE-ASSIGNING DEVICE KEYS (continued)
To Re-Assign
Perform Key Sequence
AUX
as 2nd
AUD
key:
AUX
-
SETUP
-
9
-
9
-
2
-
AUD
-
AUX
AUX
as 2nd
TV
key:
AUX
-
SETUP
-
9
-
9
-
2
-
TV
-
AUX
AUX
as 2nd
CBL
key:
AUX
-
SETUP
-
9
-
9
-
2
-
CBL
-
AUX
AUX
back to
AUX
:
AUX
-
SETUP
-
9
-
9
-
2
-
AUX
-
AUX
To re-assign another unused device key, substitute it for
the
AUX
key above and then perform the sequence. For
example, to re-assign an unused
AUD
key as a second
DVD
key, perform
AUD
-
SETUP
-
9
-
9
-
2
-
DVD
-
AUD
.
When a re-assignment is done, the selected device key
(e.g.,
AUD
) will blink twice to confirm your choice.At that
time, you will need to program device control (see
Programming Device Control
on page 10).
CHANGING VOLUME LOCK
On this remote control,
Global Volume Lock
is set to TV, so
you can control TV volume while in the
AUX
,
DVD
,
TV
or
CBL
mode. If desired, you can still perform
Individual
Volume Unlock
on a selected device to set its volume con-
trol for independent operation.
NOTE: The audio mode’s volume controls are active regardless of
Volume Lock settings. However, if you lock the volume controls to
the
AUD
mode, you will have control of the audio device’s volume
in all other modes (i.e.,
AUX
,
DVD
,
TV
, and
CBL
).
To Unlock Volume Control For A Single Device
(Individual Volume Unlock):
1.
Assuming
Global Volume Lock
is active, select
a mode on the remote control that you want to
unlock (e.g.,
CBL
) and press it once. Next,
press and hold
SETUP
until the device key
blinks twice, then release
SETUP
.
2.
Enter
9
-
9
-
3
. The last-selected device key
will blink twice.
3.
Press
VOL-
once. The last-selected device key
will blink four times.
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 20
