ENABLING MASTER POWER
At-A-Glance:
ANY DEVICE MODE (3 sec)
→
ON/OFF
→
ON/OFF
1. The Master Power feature is disabled as the default. To enable Master Power, press
and hold any DEVICE MODE button TV, VCR, CBL/SAT or DVD until the status
indicator begins to blink (approx. 3 sec.). Then release the button
2. Press and release the ON/OFF button twice. The status indicator will blink a
confirmation (2 blinks) that Master Power has been enabled.
3. Repeat the process to disable the Master Power feature.
NOTE:
• With Master Power enabled, the remote will send the power code plus 2 additional
power codes for each TV, VCR, CBL/SAT OR DVD, in that order. All of the devices should
be within the remote’ s operating range so they can receive their power code.
OPERATING THE BIG BUTTON™
Normal Operation
Once you have set up the BIG BUTTON™ for your equipment, it works like your original
remote controls. To operate, just aim it at your equipment, press an appropriate Device
Mode Button and then command the desired function by pressing a corresponding button
on the BIG BUTTON™. The indicator turns on during signal transmission and as confir-
mation of button touch. At your button touch, the BIG BUTTON™ illuminates the keypad
for 5 seconds. You will see the keypad clearly even when you are in a dimly lit area.
OPERATING THE" MENU " MODE
1. To change to "menu" mode, press
MENU
button.
2. In menu mode, use REWIND ( ), PLAY (
▲
), F.FORWARD (
▼
) , or RECORD ( )
buttons as a navigation button (blue arrow). Once the menu item is reached, press the
ENTER
button and your selection will be made.
3. If a button is not pressed within 20 seconds in the Menu mode, the remote control will
exit MENU Mode.
4. If any button is pressed except
ENTER
button in Menu mode, the remote control will
exit MENU mode.
5. In the CBL/SAT Mode, REWIND ( ), PLAY (
▲
), F. FORWARD (
▼
), or RECORD ( )
buttons are used for navigation only.
TIVO INSTRUCTIONS
1. Press menu button to enter into navigation mode.
2. Use the blue arrow buttons to navigate.
3. Press exit button to exit TIVO.
CARE & MAINTENANCE
1. Do not expose your BIG BUTTON™ to direct sunlight, high temperature, mechanical
shock, or liquids.
2. Do not use old and new batteries together as old batteries tend to leak.
3. Do not use corrosive or abrasive cleansers on your BIG BUTTON™.
4. Keep the unit dust free by wiping it with a soft, dry cloth.
5. Do not disassemble your BIG BUTTON™, it contains no user-serviceable parts.
4
▲
▲
▲
▲
