Universal Remote Control Complete Control MX-780, Owner'S Manual

Page 4

Button Lighting

The Button Light settings page provides two configurable options
for how the MX-780’s hard buttons should behave.

1. Automatic ON: Adjusting this setting controls when the hard

button backlight automatically turns on.

a. Automatic Light Yes: Every time a

button is pressed the button back
light automatically turns on.

b. Automatic Light No: The only way

to turn on the hard button
backlight is to press the dedicated
Lights button, located on the right
side of the remote control.

Once all changes have been made, press
the Save button. Pressing the Cancel
button reverts to the remote’s last saved
setting. 

Note: Selecting AutoLight Yes will

delete the batteries faster.

2. Automatic Turn Off: You can adjust the amount of time the 

backlight remains on after a button is pressed. Press the 

left

and

right

screen buttons next to the slider bar 

to change the duration. Pressing the 

Less

side decreases the time in steps down to 
a minimum of 5 seconds. Pressing the 

More

side increases the time in steps up 

to a maximum of 60 seconds. Once the 
setting has been adjusted, simply press the 

Save

button. Pressing the 

Cancel

button 

reverts to the remote’s last saved Automatic Turn off setting.

Note: Increasing the Auto Turn off time will delete the batteries
faster.  

MX-780 O

WNER

’

S

M

ANUAL