4
4 Click on the hard buttons to record the channel number you want. If you forget which favorite you are
programming, remember that the name of the favorite is displayed above the macro list of steps.
5
5 Add delay if needed. You should test the first favorite thoroughly for any need for delay. Components vary
widely in their response time. Some brands will be fine with no delay step in between IR commands. Other
brands require delays in the interval between commands. However, if the channel favorite has two identical
digits, you will most certainly require some delay between the two identical commands.
6
6 Click on the SAVE icon and continue to the next Favorite until all are complete.
IIn
nsse
errttiin
ngg M
Maaccrro
oss ((C
Co
op
pyyiin
ngg o
orr C
Cllo
on
niin
ngg aa M
Maaccrro
o))
You can often speed programming by instantly inserting all of the steps of a previously programmed macro as the
starting point of a new macro.The inserted steps are completely editable, without changing the original macro.
1
1 Do not start recording at the new location. Simply select the button where you would like the macro
inserted.Then click on the INSERT button.
4
40
0
S
Stte
ep
p b
byy S
Stte
ep
p T
Tu
utto
orriiaall
U
S
I
N
G
M
X
E
D
I
T
O
R
T
O
P
R
O
G
R
A
M
