Universal 79105, Owner'S Manual

10

Please contact Universal

®

 Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.

Mailing address: Universal

®

 Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS  39773.

Website  www.universalgymequipment.com

11     

Please contact Universal

®

 Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.

Mailing address: Universal

®

 Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS  39773.

Website  www.universalgymequipment.com

FIGURE 3

Step 21.

Step 22.

Step 23.

Step 24.

Step 25.

Step 26.

Step 27.

Step 28.

Push 45mm SQUARE PLUG (29) into end of ADJUSTABLE BACK ARM (8).

Thread SPRING KNOB (33) into BASE FRAME (2) and UPRIGHT (1) as shown.

Attach BACK PAD (19) to ADJUSTABLE BACK ARM (8) with 3/8" x 1" HEX HEAD BOLTS (43) and 3/8" WASH-

ERS (47).

Pull out on SPRING KNOB (33) in UPRIGHT (1) and insert ADJUSTABLE BACK ARM (8) into UPRIGHT and re-

lease SPRING KNOB at desired position to lock in place.

Push 25mm x 50mm END PLUG (28) into SEAT ARM (10).

Attach SEAT PAD (20) to SEAT ARM (10) with 3/8” x 1-3/4” HEX HEAD BOLT (42) and 3/8” WASHERS (47).

Attach ADJUSTABLE SEAT TUBE (7) to SEAT ARM (10) with 3/8” x 3” HEX HEAD BOLT (40), 3/8” WASHERS 

(47) and 3/8” NYLON NUTS (50).

Pull out on SPRING KNOB (33)in BASE FRAME (2), insert ADJUSTABLE SEAT TUBE (7) and release SPRING 

KNOB at desired height to lock in place.