Universal HPNP-100, Owner'S Manual

7

SPECIFICATIONS

INK ROLLS

Universal offers two ink roll options for the Non-Porous  Hand Printers.  The coders are designed to accommo-
date both types of ink rolls without modification.   A detailed review of your printing requirements will determine the
best choice of ink rolls for your particular application.

Universal’s XF Neoprene Ink Rolls are a re-inkable roll which can
be used with a variety of alcohol or glycol base inks.  These rolls
are normally supplied in a dry condition with the coder

and require

pre-inking

 prior to installation.  Pre-inked rolls are available from

the factory and are recommended for first time users.

Universal’s #100 Inks provide drying times of approximately 2 sec-
onds at 75 Degree F. (24 Deg. C) ambient temperature.  Many
other inks, both dye and pigment based, can be used in these ink
rolls to meet the specific application requirements.  Refer to the
Basic Principles of Operation section for more information on se-
lecting an appropriate ink.

Universal’s Type MT Ink Rolls are disposable pre-inked rolls which
are available in Black only.  The MT Ink Rolls provide excellent color
density and adhesion on most materials and yield a much greater
number of impressions than the XF Neoprene Rolls before replace-
ment is necessary.

The Type MT Ink Rolls provide drying times between 4 - 7 seconds at
75 Degree F. (24 Deg. C) ambient temperature.  The added conve-
nience and simplicity of using the Type MT Ink Rolls makes them an
ideal choice in high volume production applications.

XF NEOPRENE INK ROLLS

TYPE MT INK ROLLS

FIGURE 5

FIGURE 4